Re: NX> Utilities Vs. NX >Preferences
Edit: Customer defaults vs. templates is a common topic that confuses NX users. I'm not sure what Siemens can do to improve the situation, but I hope they do something. "The confusion is from the...
View ArticleRe: Replace Sketch Entity
re: situation in your screenshot It depends on your design intent. If you plan on uniting the cylinder to the D shaped object, then there is no need to extend the cylinder to the inside face. If you...
View ArticleCurved transport in mechatronics concept designer
how my model should work:as seen in the picture "curve", my carrier runs from left to right on the blue ties. when it reaches the 90°-curve, the carrier should drive with its right front corner (with...
View ArticleRe: NX> Utilities Vs. NX >Preferences
: Your reply is the type of answer I’m referring to in my question: "But why is it shying away from using one standard setting per part file?" I don't understand this question. Part settings only have...
View ArticleNX 11.0.0 - Maintenance Pack 4 Announcement
Dear Siemens PLM NX Customer, Maintenance Pack 4 for NX 11.0.0 is now available on the Siemens PLM Download Server. NX 11.0.0 MP4 is an accumulation of fixes built for installation on top of Windows...
View ArticleRe: RU/ Video lessons and helping/ Видео уроки и помощь
Обучение. Эскиз. Часть 3 Эскиз вне среды задач.Основные опции редактирования эскиза: фаска, скругление, быстрая обрезка, быстрое удлинение.
View ArticleRe: Reuse Library is slow
In general, it is not the combination of Teamcenter and NX that affects performance. It is normal for the 'first' load of the reuse library to be slower than subsequent loads. NX caches some data...
View ArticleTime lag when using commands for the first time
We have been on Nx9 for a while and at some stage it has devloped a lag of around 30 seconds when using some commands for the first time. This is experienced by all users here and is occuring often and...
View ArticleRe: Blend edges
Hi Cesare, sorry for the delay, but I've tested and thought a simple solution, but your is very nice.
View ArticleClik here to view.
NX/Simulink- NX/Motion model already open./ Current directory is different...
Hi I got error when I m doing NX/Simulink CO-simulation === Error Message ========================1. NX/Motion model already open.=> Close this NX/Motion model and try again the simulation.2....
View ArticleRe: Reuse Library is slow
Thanks for the respons! That makes things clear.We are preparing to upgrade to NX11 so i hope that the speed there is better.
View ArticleRe: Blend edges
Triumphator wrote:Hello here is another solution. Thank you for another solution.
View ArticleRe: How to create a Multiple part list with 2 assembly configurations???
*Create the arrangements*Add views (with all components) in drawing sheet.*Create the required views*Select the view in part navigator > RMB -- Edit > Select Object option from Hidden Components...
View ArticleRe: Display Part with Sketch in Draft
Alternate, we can move sketch to a particular layer and use Layer Visible in View command show/hide that particular layer in required drafting view.
View ArticleRe: Time lag when using commands for the first time
The first time you use a command, or more exactly an application area, it will take a little longer as NX is reading code information from the disk and loading to memory. However if this delay is more...
View ArticlePlot settings
Hello, Trying to figure out the settings for plotting, but it seems that regardless of output quality, file extension and other settings, the output remains horrible. It's pixelated, dimensions are...
View Article