Clik here to view.
Drawing symbol Error!!!!!!
Hello All,I just typed < 0,1% in spreadsheet. When I switch to drawing sheet tabular note, it shows error. Pictures are attached.I have checked for text format in both spreadsheet and drawing table...
View ArticleRe: Drawing symbol Error!!!!!!
Instead of <0,1%, try $<0,1%. The characters < and > are special in NX, they are used for text formatting much like HTML tags are used for webpages. The $ character escapes the special...
View ArticleRe: Drawing symbol Error!!!!!!
Hi ,Type it as "$< 0,1 %"< , > are used to define control characters to format text in NX. Adding "$" sign before "<" will work in such cases.
View ArticleRe: NX continous update
We plan on releasing the certification information in advance before releasing of the impacted NX update. From a timing perspective, the impact will dictate how much in advance we should notify and...
View ArticleClik here to view.
Re: Create NX Titleblock Template
Yes. Pattern is an old trusty way. Benefit is that it saves on memory and everyone will see the exact same titleblock inside the company with the same settings. You will need to share this setting with...
View ArticleNX reset material attribute when placing a reusable part
Hi there, Anybody knows why the NX reset material attribute when placing a reusable part? I attached the picture that show what happen when I place a reusable part. BaulerNX 12.0.1 | Windows 10
View ArticleRe: Some Questions about drawing templates for parts , assemblies and...
have you looked at the "NX12 customization", that is on this forum? I think if you read and look into this solution, it will help you a lot....
View ArticleClik here to view.
Dimensioning to a quadrant point?
I was able to place the dimension shown by adding a point object to the top quadrant point of the arc. But I was curious if there was a way to do this without the point (or any other) object? The...
View ArticleRe: SPLM License error
1) If you can, get the user's NX log file from a session where the license remains checked out, see if there's anything in there.2) Are you sure the users is closing NX, THEN disconnecting the VPN? (or...
View ArticleRe: Customer Defaults – Drafting Line Thicknesses
yes. I may have had a mix of unintended modifications. Thanks. The images were purposely exaggerated line thicknesses.
View ArticleRe: Dimensioning to a quadrant point?
If the tangent point snap is on, you can dimension to the top of the arc without the need for a point object.
View ArticleRe: Dimensioning to a quadrant point?
Hi ,While dimension dialog is active, hover the cursor over arc. From quick pick dialog select the tangent point. No need to create additional point on curve.
View ArticleRe: Create NX Titleblock Template
Patterns have good & bad pointsGood points:- everyone shares the same patterns- reduced memory / disk space usage.- if you need to change your borders, you edit the patterns and "voila" *all*...
View ArticleRe: Some Questions about drawing templates for parts , assemblies and...
regarding typing in the same info over & over:I would suggest using attributes (File -> Properties -> Attributes tab). Then have the drawing sheets reference those...
View ArticleClik here to view.
Re: Convert NVidia vMaterials to NX material
Hi Andi!Use this workflow:Copy material: Paste into custom palette: Result:
View ArticleWhat is the powerfull file type NX export to another design programs ?
Hello ,I'm new on NX . I have a general question about export file types. As you know , we can export .prt to step,iges or parasolid(.xt) from NX. For which cases i should prefer step, iges or...
View ArticleRe: What is the powerfull file type NX export to another design programs ?
My personal preference, in order, based on past experience: Parasolid.STEPIGES as a last resort.
View ArticleRe: What is the powerfull file type NX export to another design programs ?
Hi Dave ,Thanks for information.I'm generally prefer parasolid like you , but do you know what is the difference between them ? Best RegardsGurkan
View ArticleRe: What is the powerfull file type NX export to another design programs ?
My preference matches that of , but I'd like to add:Parasolid: for those programs that support it (AutoDesk products generally do not) and you don't need to preserve an assembly structureSTEP: for...
View Article