Clik here to view.
Place an angle dimension to a point?
In the sketch environment, is it possible to place an angle dimension to a point (like you can in SE, shown below)? It doesn't appear so, but thought it worth asking. Thanks.
View ArticleRe: EXPORT SE part file to NX
Yes, SE and NX are both part of Siemens PLM Software offering. However, due to different business units and targeted markets, we do not read each other’s CAD files with features listing, and have no...
View ArticleRe: How are you managing object display? SE to NX 10
I found the solution. "Layer Visible in View" is the elusive command I was looking for. Although like everything with NX, unintuitive and requiring more clicks than needed, I am able to use Layers,...
View ArticleRe: Place an angle dimension to a point?
Thanks John. That's what I thought but just wanted to be sure.
View ArticleNX MCD
HI EVERYONE! I am getting a problem in Mechatronics Concept Designer that when I am arranging the sequence order in time based operations it is not following according to the sequence that i have given...
View ArticleRe: Place an angle dimension to a point?
While creating angular dimension by default selection mode is objects with which point selection is not available. But using the selection mode Vectors and Objects it is possible to create dimension as...
View ArticleRe: Place an angle dimension to a point?
Were you creating that 'Dimension' in the context of a Drawing or as part of a Parametric Sketch, which is what the OP was asking for?
View ArticleClik here to view.
Re: Place an angle dimension to a point?
I missed that completely Thanks John for correcting me and you answered it already.
View ArticleClik here to view.
Re: wave geometry linker
Hello, Refer the attachement, i hope it would be fullfill your requirements. Regards,Ponraj
View ArticleRe: Edit vs Edit with Rollback
Hello, In NX there will be a two type of sketching envirnoment 1. direct sketch 2. sketch in task environment,if you go on edit option it will be directly go to direct sketch mode. if you use option 2...
View ArticleRe: Drawing view update
: That is very intresting discussion. Right now, at least in NX 10 (Don't know about NX11) only Auxiliary Views gets update upon changing the orientaion of base view. Not the Orthographic Projected views.
View ArticleRe: How are you managing object display? SE to NX 10
What you realy need are component groups. With component groups you can create different collections of components and handle the visibility state. Use the context menue of the Assembly Navigator to...
View ArticleClik here to view.
How to shorten the length of center mark's lines ?
HelloHow to shorten the length of center mark's right and below lines ?Possible to shorten only one or two lines ?
View ArticleRe: wave geometry linker
Thank you Kandasamy. In wave geometry linker how these options "separate feature for each body" or "one feature for all bodies" will work. Regards,sreenath
View ArticleClik here to view.
Re: How to shorten the length of center mark's lines ?
Double Click the Center Mark to edit, Under settings check option 'Set Extension Individually' and drag the arrows to adjust the length.
View ArticleRe: NX Class A Surfacing
Yes, you will need the Industrial Design bundel to get all the surface editing and analysis functions for Class A....
View ArticleRe: Drawing view update
If you are using the master model technique and you are using views from the drawing file (rather than views from the model file), you can switch to the modeling application and change the orientation...
View ArticleRe: Place an angle dimension to a point?
One option would be to create a reference line in the sketch and create the angular dimension between the line and reference line. The circle can be constrained to the end point of the reference line.
View Article