NX 11.0.1 MP1 Error
Hello, After the NX 11.0.1 MP1 was installed, this error occurred. The image is attached. Regards, Richard
View ArticleMulti-layer Component groups
Is it possible to specify the component group defined in a sub-assembly in the assembly it is placed in?
View ArticleRe: Place an angle dimension to a point?
This is indeed the only way to do it. Create a reference line from the origin of the sketch. In NX 11.0.1 the reference line will be invisible when you finish the sketch.Regards, **bleep**
View ArticleRe: How are you managing object display? SE to NX 10
Thank you for the response Andre. I am using a customer license and Advanced Assemlies is not available. Thanks, Pat
View ArticleRe: Place an angle dimension to a point?
Thanks for all the responses. Yes, my question was in regard to the sketch environment (not draft, which appears to have more options for doing this). I knew I could use a reference line, which is...
View ArticleRe: Using offset CSYS with expression?
Yes, the discussion did drift. But it hit upon another topic I've been wrestling with in NX, and that is the various coordinate systems (absolute, work, and datum) and how they're used. I have a lot of...
View ArticleRe: Edit vs Edit with Rollback
Thanks for the response. I knew there were two sketch modes (not sure why there needs to be two), and I believe the sketch task environment automatically rolls back, which is why it works with this.But...
View ArticleRe: AMESet : Obtain time derivative
Would this be better if posted in the Simcenter forum?
View ArticleRe: NX Licensing Error
Hello , I was trying to rectify the license error on NX8.5 where it was showing license server down (UGS_LICENSE_SERVER) -96 error. When i was trying to look into the env variables in licensing...
View ArticleRe: Pax file of bend table
You could try "Menu > Preferences > Palettes". This will list the locations of the pax files for any palettes that are driven by pax files, including Table palettes. Are you sure that the bend...
View ArticleRe: NX 11.0.1 MP1 Error
Are you sure you installed the MP in the location of NX 11.0.1?Are you sure the MP script completed without any "file not copied" messages?
View ArticleRe: Multi-layer Component groups
Existing ER 5705613. Can you provide a little more information? Perhaps there's an alternative method to what you're trying to accomplish. Regards, Ben
View Articleextruded cut "until selected" in assembly
I'm a relatively new user of NX10 (transitioned from Solidworks), and I'm having difficulty with the following: I have an assembly made up of 2 solid models: a cast part and the finished part (same...
View ArticleRe: NX 11.0.1 MP1 Error
Did you install NX11.0.1 first?Do you use any custom programs?You might want to give the GTAC Systems group a call. Regards, Ben
View ArticleRe: extruded cut "until selected" in assembly
Are you getting a message or an alert? Have you tried using Until Extended rather than Until Selected?Regards, Ben
View ArticleRe: extruded cut "until selected" in assembly
I do believe "until extended" worked! I selected the hidden face of the inner/finished model as the object for "until extended" and the body of the visible/cast model as the body for the extrusion, and...
View ArticleClik here to view.
Point of datum coordinate system?
Being new to NX, I'm still getting use to some of the terminology. When selecting an origin point in a sketch, QuickPicks will show something similar to below. Sketch Origin is self explanatory, but...
View ArticleRe: Point of datum coordinate system?
Because there is an actual 'point' which is part of the Datum Coordinate System object (which is a sort of composite object consisting of multiple 'entities', with this 'point' being simply one of them).
View Article