Re: Wave linking a body -how to remove original?
JohnRBaker wrote:Perhaps "Promote Body" would be better suited for what it appears that you're trying to do.Thanks John. I don't know how Promote Body works (never used it) so will look into it.
View ArticleRe: What is "free_form_modeling" license feature for?
I think it's a legacy license feature from a long time ago.nx_freeform_1, nx_freeform_1 and studio_freeform are the newer ones. I think what happens, is that if you have a licenseI did some testing a...
View ArticleRe: Vary sketch dimension dynamically?
It looks like if the dimension expression is a simple value (not a formula), you can hover your mouse pointer over the slider and use the mouse wheel to change the value.
View ArticleNX 10 and now 11 Sketch annoyances
John (and other experts),I was waiting to see if NX 11 was going to address the concerns I have in the attached PDF, but alas, they did not. I would be interested in your (collective you all) comments...
View ArticleRe: NX Error
It looks like there are no templates found for file new. Is this is an out of the box install?
View ArticleRe: NX 10 and now 11 Sketch annoyances
Unfortunately I'll never get to use NX 11.0 (at least not the finished version) as I retired better than a year ago.
View ArticleRe: Move text and line at the same time
I think the problem is that all your curves are inside a sketch (on the drawing sheet) and the text is notes (also on the drawing sheet). I wasn't able to move any of the curves without making the...
View ArticleRe: NX 10 and now 11 Sketch annoyances
The first point in your document looks normal to me.Did you als tried to change the default selection priority. Because this is default on features.The rest I didn't test so far.
View ArticleRe: Vary sketch dimension dynamically?
Once you use Edit or Edit with Rollback for sketch, Select the sketch in part navigaotr > RMB > Edit Parameters. It launches the same Sketch Parameters window.
View ArticleClik here to view.
Move Face commands. Where is "move to" ?
HelloHow to Move Face so it is exactly on the edge ?Now I try piece by piece like: 19, 20, 21, 21.5, 21.6, 21.65mm and so...
View ArticleRe: Move Face commands. Where is "move to" ?
Use 'Make Coplanar' command instead of 'Move Face'
View ArticleClik here to view.
Re: What is "free_form_modeling" license feature for?
Thank you so much for your kind reply, AnthonyI also asked the GTAC about this question and got the answer from them. I'll shere the answer by posting the comment from GTAC....
View ArticleRe: What is "free_form_modeling" license feature for?
Thank you, Don. I posted the commend from GTAC engineer, and they told me that it is the license for the older software versions. Regards,Shizuka
View ArticleClik here to view.
Move flange's position with Move Face ?
HelloHow to move sheet metal flange's position with Move Face ?I select all the flange's: faces, holes, sides and bends but it gives a large error list ?What did I do wrong ?
View ArticleClik here to view.
Constraining an elliptic arc
I have an elliptic arc that is part of a closed profile (see below). The origin, major axis, and minor axis of the ellipse are constrained to the intersection and end points of the line segments. I...
View ArticleRe: Constraining an elliptic arc
An ellipse also has an 'Axis' which is what the suggested constraint is intended to define.
View ArticleRe: NX 10 and now 11 Sketch annoyances
Thanks **bleep**,From your video example and explanation, I believe I understand. In the video, the user 're-orders' the blend before the sketch. Not sure why this is done, I would not teach my...
View ArticleClik here to view.
Re: Constraining an elliptic arc
JohnRBaker wrote:An ellipse also has an 'Axis' which is what the suggested constraint is intended to define.I thought that was defined by the rotation angle? Is that not the case? EDITI think I...
View ArticleRe: Constraining an elliptic arc
That's a curve parameter, NOT a geometric sketch constraint. Just like inputting the length of a line during its creation will not necessarily geometrically constrain it to that length.Make sense?
View ArticleRe: NX Viewer Initialization Error: This processor is too old and not...
What if my processor supports SSE3? According to CPU-Z software my PC processor supports SSE3. Thanks for any help.
View Article