Re: NX Viewer Initialization Error: This processor is too old and not...
Go to this link: http://www.plm.automation.siemens.com/en_us/support/gtac/certifications.shtml#lightview-close Then click on the Hardware (Graphics card) certifications link on the page. Those are the...
View ArticleRe: Constraining an elliptic arc
Yes. I played around with it and realized that (hence my edit above). Thanks for the reply!
View ArticleRe: Ordinate dimension - setting origin
It is showing as dashed because it has become retained. The geometry it was associated with either no longer exists, or has changed enough that the ordinate origin does not know where it is. You can...
View ArticleClik here to view.
Re: Constraining an elliptic arc
Your sketch is not fully defined. If you draw a line from the origin and let it end on the ellipse (point on curve), then you can still drag it to this shape (see below) Now it is clear that you need...
View ArticleRe: Move flange's position with Move Face ?
You should not select the bend faces, you are moving them away from the other tab.Regards, **bleep**
View ArticleRe: Import NX10 Customer Default into NX11
hi ben what are the challenges with data while tranfering from one version to the new version . how to define the procedure could you please share the info which might be useful for many customers to...
View ArticleRe: Wrong direction of surface continuity
Part of the issue appears to be you're only using 2 inputs where 2 guides and 2 sections (or a mesh type surface) would assist with the alignment issue you're having. This isn't anything new - it's...
View ArticleRe: Import NX10 Customer Default into NX11
Usually no issues with 3D - I ran into a single error on a drawing side which I was able to send into GTAC and they fixed the issue (in the meantime, I had to recreate a view to get the work done on my...
View ArticleRe: Import NX10 Customer Default into NX11
thanks for the reply if i am using nx 5 now i would like to move to nx latest version so i wann move the data from old to new can you share me any refrence on how to configure and model it
View ArticleRe: Import NX10 Customer Default into NX11
What do you mean by "move the data" to the new version? Are you referring to the Refile program that is ran from the command prompt? NX is backwards compatible. You don't HAVE to refile them to be...
View ArticleBookmarks settings?
Does anyone know where the bookmark file or settings are stored? I am using them for assemblies, and they do not appear to be retained in the part file.
View ArticleClik here to view.
Re: Bookmarks settings?
Check if there is path defined under the customer defaults settings for the Bookmark Directory. Normally when you save the bookmark, it prompts for the file name to save.
View ArticleRe: Assembly Structure and Modifications
If you want to load/open specific subassembly from an assembly, I would suggest to use 'Bookmark'. Open the entire assembly > Make the subassembly as displayed part that you want to open later >...
View ArticleRe: Wave linking a body -how to remove original?
pkelecy wrote:If I wave geometry link a body in an assembly, I end up with two bodies superimposed on each other. Although I can hide the original, I assume it's still treated as a solid body and part...
View ArticleSELECT ALL INSTANCES OF A PART IN AN ASSEMBLY AND SUBASSEMBLIES
Is it possible to select all instances even if they are in different subassemblies in order to replace them?
View ArticleNX MCD: Create sequence of operations example
Hi NX Design Community, I have created a small example of an XYZ-Portal (from Schunck) with a basic sequence in Mechatronics Concept Designer (MCD). MCD uses "Rigid Bodies", "Joints" and "Controls" to...
View ArticleRe: NX MCD
Hi Rohith93, I just posted a short Video and example how to create operations for time based sequences in MCD. You can find it...
View ArticleRe: SELECT ALL INSTANCES OF A PART IN AN ASSEMBLY AND SUBASSEMBLIES
I would follow:Find Components->Click on a part->OKOn the Assembly Navigator area, RMB and select “Expand to selected”On top of a highlighted component, RMB and select “Replace Component…”…
View ArticleRe: SELECT ALL INSTANCES OF A PART IN AN ASSEMBLY AND SUBASSEMBLIES
Menu > Assemblies > Context Control > Find Components... There you can use the various options available. Most easy is 'From List' tab, select the required component and hit OK. It will...
View Article