Re: How to install reuse library in NX
The documentation on how to do it is rigth below the file you downloaded. In additon there is a tool at the bottom of that list of files you have up to do the install. Scott
View ArticleSize of Dimensions / Coordinate System on 4K Display
Hi everbodyI am using a new notebook with a 4K display with 3840x2160 pixels. Using the 4K role made a good attempt to make NX11 usable with this resolution by adjusting the size of the toolbars/icons....
View ArticleClik here to view.
Re: Size of Dimensions / Coordinate System on 4K Display
Menu > Preferences > Visualization (or Ctrl+Shift+V) > View/Screen tab > Calibrate. Use slider to change the default values....
View ArticleRe: Size of Dimensions / Coordinate System on 4K Display
The option shown by should help with the triad display size. Note also that there are options in the sketch preferences to change the size of the constraint symbols and text.
View ArticleClik here to view.
Re: Selection priority while selecting Sketch Elements for e.g. Extrusion
The dimensions shown in the image, Are those PMI dimensions? About selection preference, you can set them by Menu > Edit > Selection or you can add it to the selection group. Set the 'Top...
View ArticleRe: Print 2A0 corrupt
As Ken says, Setting up the Plot feature for NX is very complex since there are so many possible parameters, and the combination with specific printers and corresponding drivers ...Try speak to Gtac,...
View ArticleRe: Problem with mirror assembly
Axis of Holes? Holes will belong to the component in the assembly. Creating the associative/non-associative mirror copy will not have any impact on the position of the holes. There may be something...
View ArticleRe: PMI Ordinate Dimensions
This may be steering this particular forum in another direction, but is there a way to ordinate dimension to surfaces or only get the X vector of a dimension?
View ArticleRe: NX 11.0.1 released today
there is now an article in the knowledge base on the NX 11.0.1 enhancement to better indicate individual Retained Chain and Baseline Dimensions...
View ArticleRe: Selection priority while selecting Sketch Elements for e.g. Extrusion
Thanks for your support, Those dimensions are standard sketch dimensions. They show up as soon as I selectet the first curve of my sketch for extrusion. unfortunately then all dimensions disturb...
View ArticleClik here to view.
Re: PMI Ordinate Dimensions
Ordinate Dimensions do not support face selection, so there's no way to do that. However, there are controls in the main dialog in the Baseline group to control which axis are used. If they are both...
View ArticleRe: 3 Dots in part list
Three dots in a parts list indicates a packed row with different values for the cell. This is from TDOC on Parts List Concepts. Merging cells with different values when packing rowsWhen cells are...
View ArticleRe: Remove tool part after an assembly cut?
JohnRBaker wrote:Have your tried 'Delete Body'? Now this is NOT the same as a normal Delete object. It's a new function where you parametrically 'Delete' a body. It's not really gone because you can...
View ArticleRe: 3 Dots in part list
So in your example you have two columns with the headers: "PC_NO" and "NAME". Say, for example, that you're key column that is checking for uniqueness is your NAME column - it's going to combine all...
View ArticleRe: Force assembly parts to fully load?
ruud_vandenbrand wrote:Add the bottum of the assembly load options dialog you can make your new settings default.That worked. Thanks!
View ArticleClik here to view.
Re: Force assembly parts to fully load?
Ganesh_Kadole wrote:As @ruud_vandenbrand mentioned, Use 'Save as Default' along with other options. Define and save file (Save to File) using the different load options as per your need so that later...
View ArticleRe: NX9 TC10 Compare differences between Assembly ItemRevision from NX
Thanks a lot Ganesh....let me insist on how to compare Assembly Revision in NX and how to compare Assemblies in NX that have Status.Is there an easy way to do this without use visualization and with...
View ArticleRe: NX Co-Simulation
Hi ,You might get a better response if you post your question in the SimCenter forums, unless you're using Mechatronics.Regards, Ben
View Article
