NX 10 - assembly constraints
Hello, Whenever I am trying to assembly a part into an assembly and I select a datum plane for Touch/Align, it seems that I almost always have to select Reverse Last Constraint after selecting the...
View ArticleDimension a layout on cm unit
Hi,I'm creating a layout drawing and I need to demension in cm unit and not in mm unit. Which setting I need to change ?
View ArticleRe: NX 10 - assembly constraints
Are you using datum plane in the assembly and the component you are adding? You stated you are using Touch/Align, what Orientation setting are you using?
View ArticleRe: Journal editer in NX
These steps are fairly rudimentary, but they should help to explain the functionality:a) Open a part in NX and record a journal in modeling while making changes to the part.b) Undo the commands that...
View ArticleRe: NX 10 - assembly constraints
Yes, I was using the datum plane in the assembly and the part I'm trying to assemble. As far as the Orientation, I just had it as Prefer Touch.
View ArticleRe: Dimension a layout on cm unit
Hi ,NX does not currently have the ability to dimension in Centimeters. Your options are Milimeters, Meters, Architectural Feet/Inches and Engineering Feet/Inches. ER 8700353 already exists in our...
View ArticleRe: NX 10 - assembly constraints
Check the datum plane orientation directions. For Touch they will point at each other, for align they will point in the same direction. Does this help?
View ArticleClik here to view.
Assembly cut not cutting parts with patterned features?
I'm trying to use assembly cut to cut an assembly for an FEA analysis, but for some reason some of the parts (ones containing patterned features in particular) are not being cut, even though they are...
View ArticleRe: NX 10 - assembly constraints
If you are using "touch" or "prefer touch" and always need to reverse the constraint, use "align" instead. The touch and align options work based on the normal direction of the objects chosen. The...
View ArticleRe: NX 10 - assembly constraints
Thanks! That's exactly what I needed. Much appreciated.
View ArticleRe: Size of Dimensions / Coordinate System on 4K Display
Thank you both very much, worked really well!
View ArticleRe: Linked attributes with UDF
Hello, I am not shure if that answers your question: when a userdefined attribute of a UDF is defined as "expression" datatype during the design process of the origin Feature, the expression appears in...
View ArticleRe: Assembly cut not cutting parts with patterned features?
Hi , Per the docs on Assembly Cut:Target bodies that are completely inside the tool body are not eliminated during the subtract operation. They do not cause the failure that occurs when a target body...
View ArticleRe: Assembly cut not cutting parts with patterned features?
Well, this is really disappointing news. Hiding the instances won't work because the number if instances is going to vary parametrically. Any other work arounds? The only other thing I can think to do...
View ArticleClik here to view.
Re: Can not to create New Project and Install Moldwizard Library on MOLD TOOL
I did but have a problem on the picture
View ArticleRe: Assembly cut not cutting parts with patterned features?
I am not in front of the computer right now, so i cant be sure, but maybe promoting body you can use a boolean feature
View ArticleRe: Journal editer in NX
Refer the attached SNAP document, "Chapter 2: Using the NX Journal Editor" has examples. Source: NX 10 Documentationhttps://docs.plm.automation.siemens.com/tdoc/nx/10/nx_api/#uid:index_snap_ref_guide
View ArticleFactoryCAD Files to NX9
I am working on a project that is exported from factoryCAD as a JT file.Unfortunately I can do nothing with this CAD file. It is all fFaceted bodies and I cannot even pick points to measure from. Can...
View ArticleRe: PMI for a thread
Hi Dave, I was also looking for the callout expression for symbolic thread applied as external thread. Callout expression gets created for threaded feature only. If general hole is created and then...
View ArticleRe: Flat Pattern orientation pendicular to the existing line ?
After selecting 'Upward Face' if you want to orient the flat pattern by selecting edge, You will be able to select an edge that belongs to the selected face only (Upward Face). NX will not allow you to...
View Article